AR4031C
AR1061
AW4061
 
 
 




xDSL Product Line

AW4061
ADSL2/ADSL2+ Ethernet/Wireless 802.11b/g
AP Router

AW4061, an ADSL2/ADSL2+ Ethernet/Wireless 802.11b/g AP router, provides cost-effective, high-speed data integration with wireless mobility. With AW4061, high-speed surfing becomes an enjoyable task with the most economical price/performance Ethernet/Wireless broadband access solution. AW4061 is fully compliant with ANSI T1.413 i2, ITU G.992.1, ITU G.992.2 ITU G.992.3, G.992.4 and ITU G.992.5 specifications.

This rate-adaptive solution is especially designed for Customer Premise Equipment that supports downstream data rates up to 24 Mbps and upstream data rates up to 1 Mbps. AW4061 is designed for simple installation and remote network management. Configuration and operation are extremely easy and user friendly.

Specifications
Hardware
-

Main chip : RTL8671P

-

AFE (Analog Front End) : RTL8271
-
 Wireless LAN Controller: RTL 8185B
-

IEEE 802.11 b/g WLAN RF Transceiver RTL8225

-

Status LEDs Indicator
-
 ADSL2/2+ : One RJ-11 Jack
-
 LAN : 4-Port Switch, 10/100Mbps Auto MDI/MDIX
-
 One Reset Button for factory default setting recovery
-
 DC 15V/1 A power adaptor
-
 External Antenna
ADSL Compliance
-
 ANSI T1.413 Issue 2
-
 ITU-T G992.1 (G.dmt) Annexes A
-
 G.992.2 (G.lite) Annexes A
-
 G.992.3 ADSL2 (G.dmt.bis) Annexes A,and L
-
 G.992.4 ADSL2 (G.lite.bis)
-
 G.992.5 ADSL2+
-
 Support Up to 24 Mbps downstream and 1 Mbps upstream
-
 Optional support for TR-69
ATM PROTOCOLS
-
 Support up to 8 PVCs
-

Support VC and LLC Multiplexing
-
 Support CBR, rt-VBR, nrt-VBR, UBR QoS
-
 Support ATM AAL5 adaptation layer
Wireless
-
 Standard: IEEE 802.11g and 802.11b
-
 64/128 bits WEP for security
-
 WPA support
-
 Filtering functions-MAC address filtering and protocol filtering for up-link
-
 Output Power: 5mW, 30mW or 60mW
-
 Sensitivity: -85 dB 4 m (typical)
-
 Data Rate: up to 54 Mbps, auto-fallback
-
 Support WMM, WPS, WiFi Pairing
Ethernet
-
 4 Port Switch Interface compliant with IEEE 802.3x standards
-

Automatic MDI/MDIX crossover for 10/100 Base-T port
-

Auto-negotiation and speed-auto-sensing support
-
 10/100 Full/Half (collision) flow control (control frame transmission)
-
 IEEE 802.1P/Q VLAN handling
-
 IP v4/v6, TCP, UDP packet auto-detection
-
 TCP, UDP, IP checksum task offload
-
 Uni/Mulcast address filter
Software
-

RFC-1483/2684 LLC/VC-Mux bridged/routed mode

-

RFC-1577 Classical IP over ATM

-

RFC-2516 PPPoE

-

RFC-2364 PPPoA

-

ITU-T 1.610 F4/F5 OAM send and receive loop-back
-
 802.1d Spanning-Tree Protocol
-
 DHCP Client/Server/Relay
-
 NAT
-
 RIP v1/v2
-
 DNS Relay Agent
-
 DMZ support
-
 IGMP Proxy/Snooping
-
 Stateful Packet Inspection
-
 Protection against Denial of Service attacks
-
 IP Packet Filtering
-
 QoS
-
 Dynamic DNS
-
 UPnP support
Network Management
-
 Web-based Configuration
-
 Menu-driven Command-line Interpreter
-
 Telnet Remote Management
-
 SNMP v1/v2/Trap
-
 Firmware upgrade through FTP, TFTP and HTTP
-
 Configuration backup/restore
-
 Diagnostic Tool
Environment
-
 Operating : +0 ~ +50 degree centigrade
-
 Non-operating : -20 ~ +70 degree centigrade
-
 Humidity : Operating : 10%~90% RH
Non-operating : 10%~90% RH
About Us | Products | Support | Join us | News & Event | Investor Relations

Copyright 2007 TECOM, Inc. All rights reserved.