xDSL Product Line

AR4031C
ADSL Router / Modem with 4 Ports Switch

AR4031C - ADSL Router / Modem provides you with astonishing Internet access speed. It's an ideal solution for small business and home offices that are looking for cost-effective, high-speed access, higher security and an easier way to setup equipment.

Setting up AR4031C could not be easier. Just connect your PC, laptop or local area network to the AR4031C over an Ethernet and you are ready to go.

ANSI T1.413 Issue 2, ITU-T G.992.1 (G.DMT), G.992.2 (G.Lite), G.992.3 (ADSL 2) and G.992.5 (ADSL 2+)
Supporting bridging, routering and PPP modes
Web-based configuration environment
Firmware upgrade available from TFTP via Ethernet port

 

Specifications
ADSL Compliance
-
Support Dual lantency with auto-detection
-
ANSI T1.413 Issue 2, ITU-T G.992.1 (G.DMT), G.992.2 (G.Lite), G.992.3 (ADSL 2) and G.992.5 (ADSL 2+)
ATM Protocols
-
Multiple protocol over AAL5 (RFC2684)
-
Support ATM cell format ITU-T I.361
-
ATM Forum UNI 3.1/4.0 PVC
-
Support up to 8 PVCs, each AAL5 PVC supports UBR
-
OAM F4 & F5
PPP Support
-
PPPoA (RFC 2364)
-
PPPoE (RFC 2516)
Bridging
-
Ethernet to ADSL self-learning Transparent Bridging (IEEE802.1d)
-
Filtering functions-MAC address filtering and protocol filtering
-
Support up to 256 MAC learning address
Router Features
-
RIP-1 and RIP-2
-
Static routing
-
NAT with ALGs
-
DHCP Server/Relay/Client (RFC 2131, 2132)
-
DNS Relay
-
NAT/NAPT
-
IGMP PROXY
QoS
-
ATM : CBR, rt-VBR, nrt-VBR
-
IP : IP Tos function (RFC 1349), support priority queues for upstream and downstream traffic based on ToS field
Security
-
Password protected security management
-
User authentication for PPP (PAP/CHAP)
-
Packet filtering
-
Access Control List
-
SSH
Configuration Management
-
LAN / WAN management via Telnet interface or Web-based browser interface
-
SNMP MIB 2 management (RFC 1213)
-
Firmware upgrade available by TFTP, FTP, HTTP Status
-
Self-diagnostic function display and event report from Web-based management
Physical Interface
-
One RJ11 port for ADSL connection
-
Four RJ45 ports for 10/100M auto-sensing / auto-MDIX
-
Ethernet LAN connection
-
Power switch
Power Requirement
-
AC input voltage : 120 VAC
-
Frequency : 60 Hz
Operating Environment
-
Temperature : 0°C to 40°C
-
Humidity : 10% to 90% (non-condensing)
Dimension
-
129 x 146 x 29 mm
About Us | Products | Support | Join us | News & Event | Investor Relations

Copyright 2007 TECOM, Inc. All rights reserved.